A100 Manual Dual-use Ice Machine

Product Detail

Product description

This machine is made of stainless steel, aluminum, cast iron and other material developed by, the operation is simple. Through the worm, the worm end of fixed disk feeding material fixed on the cutter rotation, making ice cubes on the Planer to make ice flocculation. Where in contact with ice, according to the national standard careful processing, and clean, without any side effects, the substances, is ideal for bar, beverage shop using your device.

Use method

Turn handle and rose to high spindle, put ice in the cutterhead; go back to shake the winch, put down the shaft, press a needle into the ice started work begins, after a program of work, again according to the steps above for the second time after work.

Use and maintenance

1. Check the device to see loose fasteners, power leakage protection switch is connected and installed and properly earthed, and will be placed on a stable platform, reliable fixed.

2. On high to expose cutter blade surface 0.5-1mm and lock, turn the handle fixing material to avoid slipping, driver CD pressing at work along needle direction not to turn back.

3. Bearing on the annual butter, edible oil every class worm corner, after the completion of each day should be dry parts on the water and residues, wipe and remove the blade, to avoid corrosion and damage, do not work, worm should be moved to the next position.

4. If the ice upset Lee, high-speed cutter or grinding tool, knife too blunt-it needs to be replaced.

5. Simple mechanical failure, be free to exclude, if there is quality problem, please call and got it.

6. Gloves is strictly prohibited actions without good grounding wire, do not use it.